2 Optical + 2 UTP Cascade GE Media Converter

This series of products are Ethernet IEEE802.3 media converters, which can realize the conversion between 10/100/1000Base-T twisted pair and 1000Base-FX optical fiber media or extend network transmission. They are mainly used for long-distance optical fiber networks (20/40/ 60/80/120 km) transmission. This product provides 2 1000M Ethernet electrical ports and shares 100M bandwidth; 2 1000M optical ports (main fiber interface and backup fiber interface, when the main fiber network is disconnected, the backup fiber network is automatically connected, without affecting Signal transmission); with perfect alarm function, the whole machine is stable and reliable, low power consumption, high integration, small size.

● Automatically adapt to 10/100/1000Mbps environment, support 10/100/1000M adaptive, full/half duplex mode, support automatic selection of twisted-pair crossover and direct connection; easy for network upgrade/system debugging and installation;
● Device provides 2 Ethernet UTP, 2 Ethernet optical port
● Two optical ports support upstream and downstream connections, multiple devices can form a cascaded Ethernet network;
● The optical interface supports three fiber transmission modes: multimode dual fiber, single mode dual fiber, single mode single fiber, SC/ST/FC/LC interface optional
● It has the functions of broadcast storm protection, flow balance, conflict isolation, error detection and crash self-reset, etc., suitable for large-flow data applications such as video transmission
● The transceiver has a built-in 1MBits high-rate buffer, which can avoid the freezing of the transmission picture caused by the IP camera in an environment where the monitoring picture changes rapidly
● Supports the transmission of VLAN ultra-long data packets, which can be matched with switch products supporting IEEE802.1Q protocol, and supports Ethernet packets with a maximum of 1536 bytes
● Effectively isolate network conflicts, isolate broadcast packets, and have broadcast storm prevention functions
● Ethernet interface with three-level lightning protection, anti-radar to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 10/700μs, open-circuit peak output voltage 6KV standard
● External AC220/5V power adapter or external DC-48V/5V power adapter

● Ethernet UTP Interface
Interface rate: 10/100/1000M, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX

● Optical Ethernet Interface
Wave Length: 1310nm, 1550nm
Interface rate: 1000 M, half/full duplex
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: FC/SC
Fiber Transmission Distance is limited by optical circuit loss and additional loss as a result of connectors, fittings and patch panel. Transmission distance may also be limited by fiber optic bandwidth.

● Working Environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)