24*SFP100Base-FX+2GE(combo Port)Ethernet switch

    24 + 2 Gigabit switch is an optical fiber converging switch, which has 24 100Mbps optical ports, 2 gigabit optical ports or 2 10 / 100 / 1000M multiplexing adaptive Ethernet ports, and 1 console port. The optical interface of the SFP can only work in 100m full duplex mode, while the RJ45 can work in 10 / 100 / 1000M, full duplex or half duplex mode.
    The 24 + 2 optical fiber convergence switch is composed of RJ45 port twisted pair interface and SFP optical interface, which are used to connect twisted pair and optical fiber respectively. The SFP interface can be inserted into the optical and electrical modules of the SFP according to the user’s requirements. It has good stability and reliability.
The 24 + 2 optical fiber combo converging switch is a kind of photoelectric signal switch which is used to switch the remote 24 optical direction 100M optical signals.P

◆Based on the design of non blocking switching chip, the total bandwidth of backplane is up to 66gbit;
◆The maximum packet length of Ethernet supports 1632bytes;
◆The equipment shall be provided with 24 100M Ethernet optical ports of SFP, 2 Gigabit Ethernet SFP optical ports and Gigabit Ethernet port multiplexing ports;
◆24 100M optical slots can be inserted into the SFP optical module, including single-mode / multi-mode, single fiber / dual fiber. Dual fiber requires two core optical fiber to transmit one Ethernet signal, while single fiber only needs one core optical fiber to transmit one Ethernet signal. Transmission distance: multi-mode: 2km; single mode: 20 / 40 / 80 / 120km;
◆Gigabit Ethernet port 10 / 100 / 1000M, supporting full duplex and half duplex network communication, with automatic negotiation ability;
◆Support the transmission of VLAN ultra long data packets, which can be matched with switch products supporting IEEE802.1Q protocol.

Fiber
Optical port: 1
Optical fiber: single fiber and double fiber
Fiber Interface: SFP
Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode
No relay transmission distance: 20~120Km
Typical transmit power:
 Single mode 1310/1550nm: ≥-9dBm
 Multimode 850nm: -18dBm
 Multimode 1310nm: -25dBm
Acceptable sensitivity range: -28dBm~- 40dBm
Ethernet interface (10/100/1000M)
Interface rate: 10/100/1000 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3az, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
Dimension
Power: AC180V ～260V
Consumption : ≤5W
Size: 485*138*45mm(L×W×H)
Working environment
Working temperature: -10°C ~ 70°C / -40℃—+85℃(industrial type)
Working Humidity: 0%~95 % (no condensation)
Storage temperature: -40°C ~ 85°C
MTBF: ＞100,000 hours