Product Category

Got any Questions? Call us Today!

+8618758069661

service@fctel.com.cn

Or leave us a message

Online Message

4FE Fiber Modem (Bandwidth 2M)

View : 681
Type : Ethernet fiber modem
Description :

This device is the extension device of Ethernet, using network to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost.

Overview

This device is the extension device of Ethernet, using network to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

Photo

Features

Based on self -copyright  IC

The device can manage the remote device condition , OAM management data did not take up user’s timeslot

The local device can forced the remote device rate follow it

The Ethernet interface supports jumbo frames (2036 Bytes);

Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering

Optical Ethernet Interface supports 100M, full duplex

4Channel 10M/100M Ethernet interface can isolate each other to realize communication independently

Have Ethernet monitor self-reset function, the equipment will not dead

The local device can forced the remote device rate follow it(when the device is unframed mode, that is invalid)

Support SNMP Network Management

The device supports unframed mode (2048K) set, it can the remote device condition when unframed

Ethernet interface supports 10M/100M, half/full duplex auto- adaptable, support VLAN

Ethernet interface supports AUTO-MDIX (crossed line and straightly connected line self-adaptable )

Can form the structure: ETH+E1 (A)---E1 Optical Fiber Modem(B)---Ethernet Fiber Modem (C)

Parameters

● Fiber

 Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber,attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

● Ethernet interface(10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation、Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability:4096

Connector: RJ45, support Auto-MDIX

● Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model

Model Number: FCP-F4

Functional Description

4ETH Physical lsolation fiber transmission, with the Ethernet to E1-E1 fiber optic MODEM- this device into a 3 point network connection

Port Description

One Fiber interface;4*FE Interface

Power

Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤10W

Dimension

Product Size: 216X140X31mm (WXDXH)

Weight

1.2KG

Application

                   

Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail