1 channels 2K HDMI corresponding to 16 Optic Directions HDMI Optical Transceiver FCVH-H16S

1 channel 2K high-definition HDMI optical terminal supports 16-channel 2K resolution HDMI signal high-speed video bandwidth, corresponding to 16 light directions, and one device (HDMI transmitter) can correspond to 16 HDMI receivers.

● All-aluminum, all-gold anodized 19-inch 1U rack-mounted;

● The device is used one-to-many, the local video can be signal input or signal output, and can be configured as two-way HDMI transmission;

● Complies with HDMI1.3a standard, HDCP1.1 protocol.

● Can be connected to an external analog audio, at this time the HDMI in-band audio is invalid (optional).

● Automatically identify and configure various display modes, the highest resolution is 1080P60, and it is compatible with downward.

● Single and multi-mode optical fiber transmission, up to 80KM.

● Built-in ESD protection circuit can effectively prevent electrostatic damage.

● On-site installation: simple and convenient, plug and play, no need to set up.

● Video visual ultra-low latency;

● Optical fiber transmission, no need for driver, compatible with any system, plug and play;

● AC220 power supply, DC-48V/+24V power supply, dual power supply AC+AC, AC+DC, DC+DC backup power supply;

● Fiber  

Optical port：1-16

Optical Fiber: Single fiber

Fiber interface: FC

Wavelength：1310nm – 1610nm Single mode

Relay-free transmission distance: 0~80Km

Typical transmit power: single mode 100uw — 0.93mw

● Audio Interface

Signal level: 0.5～4Vp-p

Input/Output Impedance: 600Ω (unbalanced or balanced)

AD/DA bit width:  24Bit

Sampling frequency:  128K

Bandwidth: 20Hz～20KHz

Total Harmonic Distortion: ＜1%

Signal-to-noise ratio (SNR): >85dB

Physical interface: 3.5mm

● HDMI Interface

●Environmental Index

Working temperature: -10℃—+60℃

Storage temperature: -40℃—+85℃

Working humidity: 0%—95% (non-condensing)

MTBF: >100,000 hours