● IP40 protection level, thick heat dissipation aluminum alloy anodized process shell, can withstand the test of harsh environment;
● With digital tube display voltage, convenient on-site voltage adjustment and service activation.
● 1 power supply specification: 24V8A 192W full power output, small temperature rise.
● With power factor adjustment (PF), PF>0.9.
● Designed according to safety regulations, isolation withstand voltage greater than 1500Vac.
● Designed with reference to EMC requirements, strong anti-interference ability.
● Complete protection functions: output overcurrent, overload, short circuit protection.
● Lightning protection function, 6KV lightning protection, can resist inductive high voltage, surge protection, etc.;
● Fanless and efficient thick heat dissipation aluminum alloy heat dissipation, reducing repair time;
● IP40 shell protection level, can withstand the test of harsh environment;
● DIN 35mm rail or wall-mounted installation;
● Wide temperature type: working temperature -40℃~ +85℃;
● Full load high temperature burn-in, 100% aging test;
|
Electrical Parameters & Specifications |
||
|
Parameter |
Model |
FCP-2408G |
|
Output
|
Voltage |
24V |
|
Current |
0-8A |
|
|
Rated Power |
192W |
|
|
Voltage Ripple (noise) |
50mVp-p |
|
|
Power Factor(PF) |
≥0.9 |
|
|
Line Regulation |
±0.3% |
|
|
Load Regulation |
±1% |
|
|
Work Efficiency |
>=91.7% |
|
|
Start-up & Rise Time |
1500ms,30ms/220Vac;2500ms，50mS/110Vac(At full load) |
|
|
Input
|
Voltage Range |
90vc–264Vac;127VDC–370VDC |
|
Alternating Current |
0.96A/220 volt，1A/110 volt |
|
|
Frequency Range |
47-63Hz |
|
|
Lightning Strikes & Surge |
6KV lightning protection, surge current: cold start <40A/230VAC |
|
|
Protect
|
Output Short Circuit |
Hiccup mode, output can be automatically restored after fault is cleared |
|
Output Over Current |
Rated output current 130%-200% |
|
|
Output Overload |
Rated output power 130%-200% |
|
|
Environment
|
Operating Temperature |
-40℃—+85℃ |
|
Working Humidity |
20-90% RH (No condensation) |
|
|
Storage Temperature |
-40℃—+85℃ |
|
|
Storage Humidity |
10-95% Relative humidity |
|
|
Vibration |
10-500Hz, 2G 10min/cycle, 60min each for X, Y and Z axis |
|
|
MTBF |
＞100,000 hours |
|
|
Specification
|
Dimensions (L x W x H) |
133mm*110mm*50mm |
|
Weight |
0.96kg |
|
Remark:
1.Unless otherwise specified, all specifications and parameters are measured at 220Vac input, rated load, and 25℃ ambient temperature.
2.Voltage noise measurement method: Use 30cm double-stripe wire to connect 1 0.1uF and 1 47uF capacitor in parallel, and measure with a bandwidth of 20MHz.
3.Accuracy: includes setting error, linear adjustment rate and load regulation
4.Linear regulation rate measurement method: Under the condition of rated output power, adjust the input voltage within the full range and measure the output voltage change rate.
5.Load regulation rate measurement method: Measure the output voltage change rate when the output current is adjusted within the full range.
If you are interested in any product, please contact us. We will introduce our products to you in more detail
Online Message
Get a Quote