64Voice+2GE Fiber Multiplexer

This device provides 64 channel telephone and 2 channel 10/100/1000M Ethernet interface (Wire Speed 1000M). The ethernet interface is a switch interface and can support VLAN.

● The voice interfaces support FXO/FXS port. The FXO port is connected to a PBX, while the FXS port is connected to the user’s telephone set.

● The FXO/FXS voice interfaces support Caller ID display, reverse polarity billing, and fax function.

● It supports mutual dialing between two sites.

● The Ethernet interfaces support 10/100/1000M, half/full duplex auto-adaptable, and VLAN.

● The Ethernet interfaces can support AUTO-MDIX (crossed and straightly connected line self-adaptable).

● Telephone interfaces are equipped with lightning protection that complies with GB/T17626.5 (IEC61000-4-5) standards for short circuit current wave 10/700μs and can withstand peak output voltages of up to 6KV under open circuit conditions.

● The transmission distance is up to 2-120 Km without interruption.

● AC 220V, DC-48V, and DC24V power supply can be optional.

● Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5/125um single mode fiber, attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9/125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

● Ethernet Interface (10/100/1000M)

Interface Rate: 10/100/1000 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Table: 4096

Connector: RJ45, support Auto-MDIX

● FXS Phone Port

Ring voltage: 75V

Ring frequency: 25HZ

2-wire Impedance: 600 Ohm (off-hook)

Return loss: 40dB

● FXO Trunk Port

Ring detect voltage: 35V

Ring detection frequency: 17HZ-60HZ

2-wire Impedance: 600 Ohm (off-hook)

Return loss: 40dB

Return loss: 20dB

● Working Environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Q: How long is the lead time after placing an order?

A: The specific lead time will vary depending on the quantity and the product. Generally, it will be 3 to 5 days.

Q: What is the MOQ?

A: For most products we support sample order. 

Q: Can the logo be customized?

A: Yes, OEM is supported.

Q: How can I get a quote?

A: After you submit your inquiry and confirm the product specifications, we will provide you with a detailed quote as soon as possible