+86 0571-87007056  service@fctel.com.cn

Managed Fiber Media Converter

  • fctel-
  • fctel-
  • fctel-
  • fctel-
  • fctel-

FE Fiber Media Converter with remote management(power internal)

Overview
This series of products are Ethernet IEEE802.3 media converters which can realize media conversion between 10/100base-T twisted pair and 100base-FX media or extend the network transmission distance. It is mainly used for long-distance optical fiber networks (20 /40/60/80/120km) transmission fully supports 10/100M transmission rate. This product has two specifications: external power supply and internal power supply.
based on the powerful local and remote management functions it has a complete alarm function. It can be connected to the optical fiber transceiver of the central office with SNMP network management and it can also be connected to the optical fiber receiver with independent SNMP network management.
Features
◆ Automatically adapt to the 10/100Mbps environment which is convenient for upgrading the electrical port MDI/MDI-X adaptive with different networks without manual adjustment which is convenient for on-site wiring;
◆ Transceiver device crash monitoring and self-reset functions can work for a long time without crashing in a large-flow video transmission environment greatly reducing the workload of equipment maintenance;
◆ The transceiver has a built-in large-capacity and high-rate buffer which can avoid the phenomenon of frame burst caused by the rapid change of the monitoring picture of the IP camera in the environment of the rapid change of the monitoring picture such as the reflection of the car lights on the road at night and rain;
◆ Supports the transmission of VLAN ultra-long data packets supports Ethernet packets with a maximum of 1600 bytes or more and is suitable for some giant frame network image transmission protocols;
◆ Support SNMP network management which can be connected to the optical fiber transceiver of the central office with SNMP network management and also can be connected to the optical fiber receiver with independent SNMP network management. On the SNMP network management you can view and set the device status and parameters of the local and opposite ends and You can set the Ethernet bandwidth of the local end and the opposite end;
◆ Support LFP (link Fault Pass Through) function when any of the fiber and twisted pair connecting the two ends of the transceiver fails the transceiver will notify the other end to display fault information;
◆ Ethernet interface with three-level lightning protection anti-radar to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 10/700μs open-circuit peak output voltage 6KV standard;
◆ AC 220V DC-48V DC24V can be optionalDC-48V/DC24V power supply polarity detection function Polarity-Free.
Parameters
Ethernet UTP Interface
Interface rate:10/100 M half/full duplex auto-negotiation
Interface Standard:Compatible with IEEE 802.3IEEE802.3u and IEEE802.3x IEEE 802.1Q (VLAN)
MAC Address Capability:4096
Connector:RJ45 support Auto-MDIX
Optical Ethernet interface
Wave Length:1310nm 1550nm
Interface rate:100 M half/full duplex
Interface Standard:Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability:4096
Connector:FC/SC
Fiber Transmission Distance is limited by optical circuit loss and additional loss as a result of connectors fittings and patch panel.Transmission distance may also be limited by fiber optic bandwidth.
Working environment
Working temperature:-10°C ~ 50°C
Working Humidity:5%~95 % (no condensation)
Storage temperature:-40°C ~ 80°C
Storage Humidity:5%~95 % (no condensation)
Application
FE Fiber Media Converter with remote management
Download