+86 0571-87007056  service@fctel.com.cn

Ethernet Fiber Modem

FE Fiber Modem (Bandwidth 2M)

This device provides one fiber interface and one Ethernet interface to achieve 10/100base-T Ethernet data transmission on fiber channel. It is a high performance self-learning Ethernet bridge. This device is the extension device of Ethernet using network to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.
◆ based on self -copyright  IC;
◆ The device can manage the remote device condition OAM management data did not take up user’s timeslot;
◆ The local device can forced the remote device rate follow it;
◆ The Ethernet interface supports jumbo frames (2036 Bytes);
◆ Inter-set dynamic Ethernet MAC address (4096) with local data frame filtering;
◆ Optical Ethernet Interface supports 100M full duplex;
◆ 1Channel 10M/100M Ethernet interface can isolate each other to realize communication independently;
◆ Have Ethernet monitor self-reset function the equipment will not dead;
◆ The local device can forced the remote device rate follow it(when the device is unframed mode that is invalid);
◆ Support SNMP Network Management;
◆ The device supports unframed mode (2048K) set it can the remote device condition when unframed;
◆ Ethernet interface supports 10M/100M half/full duplex auto- adaptable support VLAN;
◆ Ethernet interface supports AUTO-MDIX (crossed line and straightly connected line self-adaptable );
◆ Can form the structure: ETH+E1 (A)---E1 Optical Fiber Modem(B)---Ethernet Fiber Modem (C).
Multi-mode Fiber
50/125um 62.5/125um
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber attenuation (3dbm/km)Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
link budget: 16dBm
Single-mode Fiber
8/125um 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
link budget: 18dBm
Ethernet interface(100/100M)
Interface rate: 10/100 Mbps half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45 support Auto-MDIX
Power supply: AC180V ~ 260V;DC –48V;DC +24V
Power consumption: ≤10W
Product Size: 216X140X31mm(WXDXH)                
Simple packaging: 274X193X84mm(WXDXH)
Piece Weight : 1.2KG
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
FE Fiber Modem (Bandwidth 2M)