E1 To Ethernet Converter
Unframed E1-FE Converter
- Model：FCC-E1F1
- Skype：tracy.fctelEthan.fctel
- Phone：+86 18966484617
- Tel：+86 0571-87007056
- Email：service@fctel.com.cn
- Time：2020-12-07 13:31
- Get Quote Now
Overview
This interface converter provides one unframed 2048K E1 interface and one Ethernet interface to achieve 10/100base-T Ethernet data transmission on the E1 channel. It is a high performance self-learning Ethernet bridge. This device is the extension device of Ethernet using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.
Features
◆ based on self -copyright IC；
◆ Support unframed mode (2048K) set and can manage the remote device condition OAM management data did not take up user’s timeslot；
◆ Have the function of E1 interface loop back check avoid the converter crashed because of interface loop back;
◆ Have indicator when the device is power-off or E1 line is broken or lose signal;
◆ Can set the E1 line that not to send the link signal to Ethernet interface while E1 line is broken;
◆ The Ethernet interface supports jumbo frames (2036 Bytes);
◆ Inter-set dynamic Ethernet MAC address (4096) with local data frame filtering；
◆ Ethernet interface supports10M/100M half/full duplex auto- Negotiation and AUTO-MDIX(crossed line and straightly connected line self-adaptable );
◆ Have Ethernet monitor self-reset function the equipment will not dead；
◆ Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;
◆ Provide 2 clock types: E1 master clock and E1 line clock;
◆ The local device can forced the remote device rate follow it(when the device is unframed mode that is invalid) ；
◆ Have three Loop Back Mode: E1 interface Loop Back (ANA)、Ethernet interface Loop Back(DIG)、Command the remote Ethernet interface Loop Back(REM)；
◆ Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
◆ Support SNMP Network Management;
◆ Can realize monitor of remote equipment temperature and voltage from local equipment;
◆ Can form the structure: Ethernet E1 Bridge(A)－－-E1 Optical Fiber Modem(B)－－-Ethernet Optical Fiber Modem (C)；
◆ Can form the structure: Ethernet E1 Bridge(A)－－-Optical Ethernet Modem(B)－－-Ethernet Optical Fiber Transceiver (C)can manage (B) and (C) at (A).
Parameters
E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance) 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
Ethernet interface (10/100M)
Interface rate: 10/100 Mbps half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45 support Auto-MDIX
Power
Power supply: AC180V ~ 260V；DC –48V；DC +24V
Power consumption: ≤10W
Dimension
Product Size : 216X140X31mm( WX DXH))
Simple packaging : 274X193 X84mm ( WX DXH)
Piece Weight: 1.2KG
Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Application
Applications 1
Applications 2
Applications 3
Download
PREVIOUS：framed E1-FE Converter NEXT：Framed E1-FE+2RS232 Converter
CATEGORIES
LATEST NEWS
CONTACT US
Skype: tracy.fctel
Tel: +86 0571-87007056
Phone: +86 18966484617
Email: service@fctel.com.cn
Add: 7F,Building 2,NO.9 XiYuan 2nd Road,West Lake Technology Park, Hangzhou,China.