+86 0571-87007056  service@fctel.com.cn

POE Media Converter

  • fctel-
  • fctel-
  • fctel-
  • fctel-

1-2GE POE Fiber Media Converter

Overview
This series of products is Ethernet IEEE802.3 media converter can achieve the conversion or extension of network transmission between 1-2*10/100/1000base-T twisted pair and 1000base-X optical fiber media mainly used in optical network long distance 20/40/60/80/100 km) transmission. The Ethernet port provides IEEE802.3af / at powering capability to power other devices such as wireless access points (APs) over Category 5 Ethernet lines or IP phones.
Features
◆ Automatically adapt to 10/100/1000Mbps environment easy to upgrade with different networks;
◆ Transceiver with crash monitoring and self-reset and other functions long-term work in the large flow of video transmission environment does not crash greatly reducing the workload on equipment maintenance;
◆ Transceiver built-in high-capacity high-speed cache the backplane switching bandwidth of 16G to avoid IP cameras in the rainy night road car lighting reflections and other monitoring images rapidly changing circumstances caused by the frame burst transmission Caton phenomenon;
◆ Support for the transmission of long data packets in VLAN and support Ethernet packets up to 10K bytes or more for some Jumbo frame network image transmission protocols;
◆ Support full duplex and half duplex network communication with auto-negotiation capability electric interface MDI / MDI-X adaptive No manual adjustment to facilitate on-site line;
◆ Support IEEE 802.3az energy-saving protocol low power consumption low heat can work stably for a long time;
◆ Supports Power over Category 5 Ethernet APs and surveillance cameras;
◆ 1-2 Ethernet supports standard IEEE802.3af / at power supply; Each port can be sufficient power output 15.4W (IEEE802.3af) at 25.5W (IEEE802.3at);
◆ Ethernet interface with three lightning protection lightning protection to GB / T17626.5 (IEC61000-4-5) short-circuit current wave 10 / 700μs open peak output voltage 6KV standard.
Parameters
Ethernet optical interface          
Working wavelength: 1310nm 1490nm 1550nm
Rate: 1000M full duplex or half-duplex mode
Protocol: Supports IEEE 802.3ab IEEE 802.3z
MAC Address Table:  4096 MAC addresses
Physical Interface: FC / SC / ST / LC
The distance over which the fiber is transported is limited by the loss of the optical path and the additional loss due to the connection terminals connectors patch panels. The transmission distance may also be limited by the bandwidth of the optical fiber.
10/100/1000M Ethernet interface        
Protocol: Complies with IEEE 802.3ab IEEE802.3z
Rate: 10/100/1000M adaptive full / half duplex fully adaptive MAC
Address Table:  4K MAC address
Physical interface: RJ45 seat support Auto-MDIX (cross / straight line adaptive)
Ethernet POE features         
PoE standard: IEEE 802.3af / at
PoE Type: End Crossing Method (optional intermediatebridging method)
PoE Port Features: Port output power 15.4W / 25.5W
PoE transmission core: 1/2 + 3/6-pair (optional 4/5+ 7/8-pair)
Environmental indicators  
Operating temperature: -10 ℃ - +60 ℃
Storage temperature: -40 ℃ - +85 ℃
Humidity: 0% -95% (non-condensing)
MTBF:> 100000 hours
Application
1-2GE POE Fiber Media Converter
Download

CONTACT US

Skype: tracy.fctel

Tel: +86 0571-87007056

Phone: +86 18966484617

Email: service@fctel.com.cn

Add: 7F,Building 2,NO.9 XiYuan 2nd Road,West Lake Technology Park, Hangzhou,China.