+86 0571-87007056  service@fctel.com.cn

mutil-service voice over fiber mux

64Voice +8E1 +4GE Fiber Multiplexer

This product is a 19 inch 1 U rack installation 64channel voice,8channel E1 interface 4*10M/100M /1000M Ethernet interface. Four Ethernet interface for the exchange can support VLAN. The application is very flexible. Have perfect alarm function the machine work stable and reliable low power consumption high integration small volume.
◆based on proprietary integrated circuit;
◆1U19-inch rack-mount;
◆1-64 channels of voice access supports Caller ID and reverse polarity billing functions;
◆Support Telephone Number mutual function of each site;
◆FXO and FXS voice ports support port FXO port and docking PBX FXS port is connected to the user’s phone;
◆E1 interface complies with G.703 recommends using digital clock recovery and smooth phase-locked technology;
◆Optional 4-channel Ethernet interface for the exchange support VLAN;
◆Ethernet interface rate of 10M / 100M full / half duplex adaptive;
◆Can detect when the optical signal is lost for the end device powered down or fiber barrier and through the LED indicates alarm;
with this end in view job status display function remote device;
◆Provide command remote loopback interface easy to line maintenance;
◆Provide Console management interface easy to install open;
◆Unrepeated transmission distance of up to 2 to 120 km;
◆Multiple power mode options: AC220V DC-48V / DC24V etc;
◆DC-48V / DC24V power supply with automatic polarity detection function when installed without distinction between positive and negative;
◆Telephone interface with lightning protection lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μsopen-peak output voltage 6KV standards.
Multi-mode Fiber
50/125um 62.5/125um
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber attenuation (3dbm/km)
Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
link budget: 16dBm
Single-mode Fiber
8/125um 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
link budget: 18dBm
E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance) 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation:0~6dBm
Ethernet interface(10/100M/1000M)
Interface rate: 10/100 Mbps half/full duplex auto-negotiation
Interface Standard:Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector:RJ45 support Auto-MDIX
FXS Phone Interface
Ring voltage: 75V
Ring frequency: 25HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
FXO Switch Interface
Ring detect voltage: 35V
Ring detection frequency:17HZ-60HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
EM 2/4 Line
AD: 0dB
DA: -3.5dB
Two/Four-line Impedance: 600 Ohm
Return loss:  20 dB
Working environment
Working temperature:     -10°C ~ 50°C
Working Humidity:     5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity:  5%~95 % (no condensation)
64Voice +8E1 +4GE Fiber Multiplexer