4GE+2RS232 Fiber Mux (Desktop Tpye)

    The Equipment supports 4*1000M Ethernet + 2*RS232/422/485/ or 4*Dry contact  interface to the optical fiber converter. To achieve network + telephone + serial data + Dry contact 4 type interface in the same core Optical fiber transmission is widely used in a variety of industrial control card instrumentation and other occasions . Not only save fiber resources but also save fiber equipment, reduce the point of failure to facilitate the maintenance of equipment. 4*1000M Ethernet interface bandwidth for the wire speed 1000M.

◆Equipment to provide 4*1000M GE port; 2*serial data interface / 4*dry contact;
◆Voice port support FXO/FXS/2 Wire Audio/Magnet phone interface FXO port plug into PBX  FXS port is connected to the user’s telephone;
◆FXO/FXS telephone interface support caller ID / reverse polarity billing / fax function;
◆Both sides of the device support FXO+FXS hybrid access;
◆RS232/RS485/RS422/TTL/Dry contact transmission channel flexible application;
◆Serial interface can be transmitted asynchronously from 300-115200 baud rate adaptive serial data;
◆4*GE, bandwidth wire speed 1000M, automatically adapt to 10/100/1000Mbps ,easy to upgrade the network;
◆ Ethernet interface supports full-duplex and half-duplex network communication with auto-negotiation capability MDI / MDI-X adaptive without manual adjustment;
◆A variety of power options: AC220V DC-48V / DC24V;
◆Telephone/Ethernet/serial-data interface with lightning protection lightning protection to IEC61000-4-5 short-circuit current wave 10/700μs open peak output voltage 6KV standard;

Fiber
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
 Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
Ethernet interface(100/1000M)
 Interface rate:              100/1000 Mbps half/full duplex auto-negotiation
 Interface Standard:      Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
 MAC Address Capability: 4096
 Connector:                  RJ45 support Auto-MDIX
 Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)