8FE to 100base-fx Media Converter (Power Internal)

This series of products are Ethernet IEEE802.3 media converters, which can realize the conversion between 8*10/100base-T twisted pair and 100base-FX optical fiber media or extend network transmission, and are mainly used for long-distance optical fiber networks ( 20/40/60/80/100km) transmission. This product provides 1 Fast optical port and 8 Fast Ethernet electrical ports. With perfect alarm function, the whole machine is stable and reliable, low power consumption, high integration, and small size. 

● International standard: IEEE 802.3z 100base-X 802.3ab 1000base-T;
● With anti-crash monitoring automatic reset function, suitable for heavy load applications such as high-definition network cameras;
● Electrical interface (RJ45 interface) supports 10/100M adaptive, full/half duplex mode, MDI/MDI-X automatic detection;
● The optical interface supports three optical fiber transmission modes: multimode dual fiber, single mode dual fiber, and single mode single fiber, SC/ST/FC/LC interface is optional;
● It has functions such as broadcast storm protection, flow balance, conflict isolation, error detection and crash self-reset, which is suitable for large-flow data applications such as video transmission;
● The transceiver has a built-in 1MBits high-rate buffer, which can avoid the freezing of the transmission picture caused by the IP camera in an environment where the monitoring picture changes rapidly;
● Supports the transmission of VLAN ultra-long data packets, which can be matched with switch products that support IEEE802.1Q protocol, and supports Ethernet packets up to 9K bytes;
● Ethernet interface with three-level lightning protection, anti-radar to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 8/20μs, open-circuit peak output voltage 6KV standard;
● A variety of power supply options: AC220V, DC-48V/DC+24V/ DC+12V, etc.;

● Ethernet UTP Interface
Interface rate: 10/100M, half/full duplex auto-negotiation Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX

● Optical Interface
Wave Length: 1310nm, 1550nm
Interface rate: 1000 M, half/full duplex
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096
Connector: FC/SC
Fiber Transmission Distance is limited by optical circuit loss and additional loss as a result of connectors, fittings and patch panel. Transmission distance may also be limited by fiber optic bandwidth.

● Working Environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation) Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)