FE Fiber Media Converter

The device is Ethernet IEEE802.3 media transceiver to achieve media conversion or extending network transmission distance between two kinds of media, which are 10/100Base-T UTP and 10/100Base-FX or 10/100Base-T UTP and 10/100Base-FX. It mainly used for fiber network far distance (20/40/60/80/120km) transmission, supports 10/100M or 10M, 100M transmission rate. Fiber port and UTP can work through 10M or 100M rate.

● Automatically adapt to 10Mbps and 100Mbps environment, upgrade network easily;
● Support full-duplex and half duplex network communication, with auto-negotiation capability;
● The Ethernet interface supports jumbo frames (1600bit), which can match with the switch product complied  with IEEE802.10 protocol
● Support the LFP (Link Fault Pass Through) function ,when the fiber used connecting transceiver and UTP  has fault, transceivers will notify the other end indicating fault information
● With Fiber Alter function, that is, after not receiving optical signal automatically cut off optical circuit (opened  on network management);
● Support FX half/full duplex and link fault alarm function switch optional
● Support UTP cross connection switch optional, convenient for system debugging and setup
● Low power consumption, Low heating, can be stable work for a long time;                                  
● Single-core optical fiber and internal and external power optional, expands user’s needs

● Ethernet UTP Interface
Interface rate: 10/100M, half/full duplex auto-negotiation Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX

● Optical  Interface
Wave Length: 1310nm, 1550nm
Interface rate: 1000 M, half/full duplex
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096
Connector: FC/SC
Fiber Transmission Distance is limited by optical circuit loss and additional loss as a result of connectors, fittings and patch panel. Transmission distance may also be limited by fiber optic bandwidth.

● Working Environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation) Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)

Application 1

Application 2