Managed Fast Ethernet Media Converter

This device is Ethernet IEEE802.3 media converter, which can realize media conversion between 10/100base-T twisted pair and 100base-X media or extend the network transmission distance, mainly used for long-distance optical fiber networks (20/40/60/80/100 km) transmission, fully supports 10/100M transmission rate.

● The device automatically adapts to the 10/100M environment.

● It has crash monitoring and self-reset functions that can work for a long time without crashing in a large-flow video transmission environment, greatly reducing the workload of equipment maintenance.

● The device has a built-in large-capacity 1Mbits high-rate buffer, which can avoid the phenomenon of frame burst caused by the rapid change of the monitoring picture of the IP camera in the environment of the rapid change of the monitoring picture such as the reflection of the car lights on the road at night and rain;

● It supports the transmission of VLAN ultra-long data packets, supports Ethernet packets with a maximum of 10K bytes or more, and is suitable for some giant frame network image transmission protocols;

● It supports LFP (Link Fault Pass Through) function, when either the fiber or twisted pair connecting the two ends of the device fails, the device will notify the other end to display the fault information.

● The device has a power failure detection function, which can detect when the optical signal is lost, the peer device is powered down or the fiber is blocked.

● The Ethernet interface with 3-level lightning protection, anti-radar to GB/T17626.5 (IEC61000-4-5) short-circuit current wave 8/20μs, open-circuit peak output voltage 6KV standard.

● External AC220V/5V power adapter, can also be an external DC-48V/5V power adapter.

● Fiber

Optical port: 1

Optical fiber: single fiber and dual fiber

Fiber Interface: FC/SC/ST/LC (SFP)

Wavelength: 850nm/1310nm multi-mode; 1310nm/1550nm single-mode

No relay transmission distance: 20~120Km

Typical transmit power:
    Single-mode 1310/1550nm: ≥-9dBm
    Multi-mode 850nm: -18dBm
    Multi-mode 1310nm: -25dBm

Receiving sensitivity range: -28dBm~- 40dBm

● 10/100M Ethernet Interface

Protocol: IEEE 802.3, ieee802.3z compliant

Rate: 10/100M adaptive, full/half duplex Fully Adaptive MAC

MAC Address table: can learn 4K MAC address

Physical interface: RJ45, supporting auto mdix (Cross/through line adaptation)

● Working Environment

Working temperature: -10 ° C – +60 ° C

Storage temperature: -40 ° C – +85 ° C

Working humidity: 0% – 95% (no condensation)

MTBF: >100,000 hours