4FE Fiber Modem (Bandwidth 2M)
- View : 648
- Share :
- Type : Ethernet fiber modem
- Description :
This device is the extension device of Ethernet, using network to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost.
This device is the extension device of Ethernet, using network to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost.
This device is the extension device of Ethernet, using network to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.
● Based on self -copyright IC
● The device can manage the remote device condition , OAM management data did not take up user’s timeslot
● The local device can forced the remote device rate follow it
● The Ethernet interface supports jumbo frames (2036 Bytes);
● Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
● Optical Ethernet Interface supports 100M, full duplex
● 4Channel 10M/100M Ethernet interface can isolate each other to realize communication independently
● Have Ethernet monitor self-reset function, the equipment will not dead
● The local device can forced the remote device rate follow it(when the device is unframed mode, that is invalid)
● Support SNMP Network Management
● The device supports unframed mode (2048K) set, it can the remote device condition when unframed
● Ethernet interface supports 10M/100M, half/full duplex auto- adaptable, support VLAN
● Ethernet interface supports AUTO-MDIX (crossed line and straightly connected line self-adaptable )
● Can form the structure: ETH+E1 (A)---E1 Optical Fiber Modem(B)---Ethernet Fiber Modem (C)
● Fiber
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)
Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber,attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
● Ethernet interface(10/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation、Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability:4096
Connector: RJ45, support Auto-MDIX
● Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Model |
Model Number: FCP-F4 |
Functional Description |
4ETH Physical lsolation fiber transmission, with the Ethernet to E1-E1 fiber optic MODEM- this device into a 3 point network connection |
Port Description |
One Fiber interface;4*FE Interface |
Power |
Power supply: AC180V ~ 260V;DC –48V;DC +24V Power consumption: ≤10W |
Dimension |
Product Size: 216X140X31mm (WXDXH) |
Weight |
1.2KG |
If you are interested in any product, please contact us. We will introduce our products to you in more detail