32E1+4GE PDH Fiber Multiplexer

This device is a point-to-point optical transmission device based on VLSI. The device provides 1-32*E1 interface, 1-4*10/100/1000M Ethernet interface (Wire Speed 1000M) and 2 expansion interfaces. 4* Ethernet interface is a switch interface, which can support VLAN. 1 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, dry contact signal, and 1-channel EOW phone can be optional. It is very flexible. It has an alarm function. The work is reliable and stable. It has low power consumption, high integration, and small size.

●  Based on self-copyright IC

●  The Fiber bandwidth is up to 1.5G, Ethernet bandwidth is Wire Speed 1000M

●  Ethernet interface rate is 10/100/1000M, half/full duplex Auto-Nego

●  4*Ethernet interface is switch interface, supports VLAN, can be set to 4 channel logical isolation

●  Provide Console manage interface (RS232) (optional)

●  Provide two fiber interface(SFP module), 1+1 protect（APS）function (optional)

●  E1 interface complies with G.703, adopts digital clock recovery and smooth phase-lock technology

●  Uses standard 2-wire telephone (non-telephone handles) set as engineering order-wire hotline(optional)

●  When the optical loses signal, it can detect the remote device is powered off or the fiber is disconnected, and indicates an alarm by LED

●  The local device can view the remote device’s working condition

●  Provide 2 expansion interface, you can extend 1~2Channel asynchronous data, such as RS232/RS485/RS422/Manchester code;

●  Provide command the remote interface Loop Back, support local E1 Loop Back function, support E1 LOS and AIS alarm, ease line maintenance

●  The transmission distance is up to 2-100Km without interruption

●  Support SNMP manager (SNMP agent inside)(optional)

●  AC 220V, DC-48V, DC24V can be optional

●  DC-48V/DC24V power supply polarity detection function, Polarity-Free

● Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

● E1 Interface

Interface Standard: comply with protocol G.703;

Interface Rate: n*64Kbps±50ppm;

Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

● Gigabit Ethernet Interface (10/100/1000M)

Interface rate: 10/100 /1000Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability:4096

Connector: RJ45, support Auto-MDIX

● Working Environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)